CaseStudy9Top

CASE STUDY 9:

"After this...my costs halved!

D10Bellows2 D10Bellows1

IF WE CAN HELP YOU MAKE YOUR CYLINDERS LAST TWICE AS LONG, YOU'RE COSTS HAVE HALVED...CORRECT?

Client Profile: An independent Mining Contractor & Equipment Operator servicing Regional Western Australia.

The Problem: The client had an ongoing issue with Blade Lift Cylinders on their D10’s wearing out too quickly due to abrasion and impact damage, eventually causing oil leakage. The client approached Callcott & Downey to find a solution that would increase the service life of their cylinders.

Our Goal: To extend the service life of the Client's Hydraulic Cylinders to massively cut ongoing expenses

The Solution: Callcott and Downey took the component in question, and manufactured a unique Bellows out of special material, in such a way that it would provide additional protection from the elements. It was designed to allow onsite fitters to install the bellows without the need to remove the cylinder.

The Result: Once the bellows were installed on the repaired cylinders, the client tested the results on site and found that with the bellows installed the cylinders would last twice as long before requiring maintenance, cutting their expenses in half, since then Callcott’s have provided a number of similar solutions for the client.

IF YOU ARE EXPERIENCING ISSUES WITH HIGH SALINITY, CORROSION, MECHANICAL BREAKAGE, IMPACT DAMAGE, PREMATURE BEARING, PIN, BUSH FAILURE OR ANYTHING ELSE, CALLCOTT & DOWNEY WILL WORK WITH YOU TO ELIMINATE YOUR RECURRING FAULTS, RESULTING IN MASSIVE ONGOING SAVINGS!